As promised, here is the post on our chicken coop build. To start with let me give credit where credit is due. I am NOT a carpenter and don’t play one of TV, so I found these barn shed plans and winged it from there. My lovely wife helped and when a problem arose we sketched it out and made a decision and went with it. We chose this design as our house has gambrel ends and we wanted the coop to match in style.

So first problem we encountered was the area we chose looked almost level, but wasn’t even kind of. So the downhill side was raised almost 30 inches on pressure treated posts. Along with that we live at Stone Hill Ridge, with an emphasis on the “stone”, so digging holes for concrete supports was out. We decided to use concrete deck blocks like this one.

Concrete Deck Block

After that was settled, we build the floor deck and walls on our house deck which was flat and level. Really the whole build was done our deck and moved up the hill to the build site for assembly. Here are some picks of the deck and walls going up.
[wppa type=”thumbs” album=”4″][/wppa]

Then the siding, roof, and sliding barn door went on. The trick we used to get the gambrel roof trusses to match was that after we cut the 2X4’s to the correct angles, we laid one on the deck and used scrap 2X4’s to create a jig. Then we built them by placing 2X4’s into the jig, gluing and screwing the gussets at each joint. The barn door was made from a 2X4 that I routed out the back of to make a lip dep enough to hold the siding. It has casters mounted top and bottom that slide in a 2X4 frame attached to the front wall.
[wppa type=”thumbs” album=”5″][/wppa]

On the inside we added flooring, roost (made from fencing with some spindles removed), and a nest box. The flooring didnt go down well, it was cold and rainy, but we wanted to get it done. We used vinyl flooring which we will cover with wood shavings for easy cleanup. This worked well in our tiny city coop, so why not here. We built the feeder from scrap lumber. It sits in the corner and is gravity feed. It will easily hold 300 lbs of feed, which I have to watch or I will have a 300lb mouse to show for it. The nest boxes were ordered from eBay. The seller recommended a box for each 3-4 hens. I went with four because the size and shape fit well with the coop and I don’t plan to have more than 16 laying hens. The funny part was the hens started by laying eggs on top of the feeder, but the would roll off an break. I finally took a cardboard box with some straw and placed it on top of the feeder. They are slowly transitioning to “real” nest boxes, but I have one or two that still prefer the cardboard box.
[wppa type=”thumbs” album=”7″][/wppa]

The final view of the outside. It is 8X10 foot and about 15 ft high at the roof peak. If I do the math right that is 80 sq ft and if you subscribe to having 4 sq ft per chicken I could have up to 20 birds. My birds free range some (see post on Chicken Lock Down) so could go more than 20. We currently have 11 layers, 1 rooster, and 2 guinea fowl. Short term as we raise meat birds we could add birds to the coop, but long term we cant even eat the eggs fast enough as it is with just 11 layers.
[wppa type=”thumbs” album=”6″][/wppa]